Initial Thoughts: KONUS PRO M30 10X-40X52MM

Wow, how far can I see with my new telescope? Yesterday was a first for me.  I came home from work and there, on my coffee table, was a brand new scope that I didn't pay for (yet).

The Konus Pro M30 10X-40X52mm is HUGE measuring just a bit over 18 inches without the 4 inch sunshade attached.  As noted above it also has a huge amount of magnification.  I'll be the first to admit that I am a fan of high magnification, but there are pros and cons to it like everything. With higher magnification comes a bit slower target acquisition, but better visibility down range.  When Travis asked me to choose what scope I'd like to review I found the highest magnification available from Konus.  Why not, I have a 300 win. mag. just waiting to be stretched out.

As mentioned the scope comes with a sunshade.  Also, included with the optic are two flip up lens covers, allen wrench for resetting the turrets, a spare battery for the illuminated reticle, and an owners manual.  At first glance the owners manual seems to be the length of Leo Tolstoy's War and Peace, but as it turns out they included a translation for a total of ten languages... Greek anyone?  The English section is only about four pages and is fairly concise.  It covers your basic functions, has a diagram that explains all the measurements of the milliradian (Mil) reticle, and a conversion chart from MOA to Mils.

The 10X-40 is pretty feature heavy, most obvious are the tall locking-target turrets.  The turrets are 1/10th Mil. adjustments, have a very noticeable click when turned, and feel very solid.  The locks aren't sleek by any means, but they lock solidly preventing any rotation.  On the left side of the scope is a parallax adjustment knob that adjusts from 10 yards to infinity.  The parallax knob turns smoothly without any detents to indicate what range the focus is being adjusted to.  I don't feel this is a big issue since the shooter is going to adjust this in and out until the target is in focus regardless of what the dial says.  There is also a locking "fast-focus" adjustment on the eyebell to sharpen the appearance of the reticle.  Just in front of the eyebell there is an illumination knob offset at 45 degrees.  There are two illumination colors, red and blue, each color has five brightness levels. The magnification adjustment like all the others seems very smooth from 10x-40x. On the outside the scope seems to be very well constructed and has an even matte black finish.  It is nitrogen filled, and shockproof so it should do fine on larger caliber rifles.

The glass is very clear, multi-coated, and fog proof.  This is a second focal plane scope, meaning that the reticle is in the second lens, not the first.  What that means is that the measurements on the mildot reticle are only accurate at a certain power of magnification.  Typically that is at the highest power magnification.  The illuminated mildot portion of the reticle is 10 Mils in diameter.  The dots measure 0.2 Mils, from dot center to dot center measures 1 Mil.  Outside of the 10 Mil. area the stadia are heavy and solid, measuring 18.3 Mils.  So if you are doing the math the reticle is a total of 46.6 Mils in diameter.  Just below the reticle in the shooters field of view is an internal bubble level.  This is a big plus allowing the shooter to correct any canting without having to change position.  At first glance the internal level is pretty hard to see, but I haven't mounted the scope yet so it could be my eye relief, nor have I looked through the scope outside in the sun.

During the review period this scope will be mounted on a Savage model 111 chambered in 300 winchester magnum.  I'll also be doing a review on the rifle soon.  I'll be looking for a few specific things as I review the Konus.  One is light transmission.  Being that this scope has such a long body it could decrease the amount of light transmitted back to the shooters eye.  The 52mm bell and 30mm tube should help though.  Eye relief is an area that I seem to have issues with, and at 3.44 inches of eye relief on this scope should be pretty good.  I'll also be checking the accuracy of the elevation and windage adjustments on the turrets, and parallax adjustment.  My goal is to find a scope that will allow me to shoot long distances, 1000 yards plus, without breaking the bank.  The MSRP on this particular scope is about $750, however, I was able to find it on Amazon for $400.  I am looking forward to mounting this scope and seeing what I can do with it in the coming weeks.

 

Lionheart Industries LH9C Expanded Initial Thoughts

So yesterday I posted a video with my initial thoughts on the Lionheart Industries LH9C and I figured that I would expand a little more with this post.

Fit and Finish

The LH9C is a very well made pistol, when you get one in your hands you can see how good the quality of the workmanship is. The slide moves easily on the frame with minimal play, and I can actually grip it with one hand and rack the slide back (not that I would ever really need to do that). There aren't any rough or sharp edges on the gun, and the Cerakote finish gives it an extremely clean look and very durable finish.

The serrations are deep and plentiful on the gun making it easy to rack the slide even when covered with dirt or your hands are slick. The serrations on the backstrap of the gun do offer a nice amount of grip to keep the gun from moving side to side, while remaining comfortable and not digging into your hand.

The grips are beastly, the diamond pattern is deep and gives a very positive hold to your hands. They aren't rubber like they would appear in pictures, but a more solid polymer/plastic which makes them a little less comfortable.

Ergonomics and Shooting

The ergonomics of the LH9C are pretty good, it does fit well in my hands and it is very easy to "point" without having to make adjustments. While the safety isn't really needed because of the DA+ feature it is easy to manipulate, even though it is opposite the 1911 safety direction which would take some getting used to.

One thing that I did notice was the trigger guard rubs my finger which would cause it to rub that finger raw during a class. This was actually an issue I ran into with my Glock 19 also, but I was able to fix that with an undercut whereas the LH9C cannot have that modification done to it.

Having the Novak sights is a very nice feature since they are stout and would stand up to a lot of abuse, but like I said in the video I am not a big fan of the fact that they ramp up and there isn't a way to use the rear sight to rack the slide if you need to.

Using the DA+ trigger is very different and takes some getting used to. One thing that I will say that I like about the DA+ is the fact that it's not a "de-cocker" like most other hammer fired guns, instead it makes getting into SA from DA easy. The problem I have is that it can throw you off target a bit when the hammer does drop back into SA mode. I am sure this is something you can train and adjust to if this gun would be a primary carry, but for me this is something I am just not a fan of.

The single action pull is actually one of the better ones I have felt on a stock hammer fired gun, and the reset is solid. It is very easy to get off quick successive rounds with this gun and remain on target. The double action pull is crazy heavy but I understand why, but is also the reason why if I carried this gun I would carry in the DA+ mode.

Thoughts So Far

The LH9C is an extremely well made gun, there is a lot of care put into the manufacturing of the gun itself and it does have some good upgrades on it when compared to some of the other hammer fired guns in it's price point. The fact that it comes with a soft carry case, Cerakote, novack sights, and 2 magazines is pretty cool because a lot of the other companies don't include things like that.

I am looking forward to getting a few hundred more rounds through the gun and seeing if it grows on me or not. I have been impressed by the fact that it was able to clear itself out enough to function despite being completely covered in the red Oklahoma dirt out at the range.

Like I said in the video, this isn't an ideal carry gun for me. However that is my opinion and preference and not a review of this gun.

Some Quick Thoughts: Windham Weaponry .308 SRC

Yesterday I picked up the Windham Weaponry .308 SRC from my FFL, to say that I was stoked to get my hands on it would be an understatement. I was impressed by the rifle and it's quality at SHOT Show and have been looking forward to getting some range time with one since then.

The first thing I noticed out of the case (which the rifle comes with a rifle case which is better than a cardboard box) was the quality of the finish, it was very clean and the parts all looked to be good quality. It comes with a Houge rubber pistol grip instead of the standard plastic one, which is a nice upgrade. The other nice addition to the rifle is the fact that it comes with a 20 round PMag instead of the standard metal magazine.

The gas block is rail height which is awesome since you won't have to worry about purchasing a "gas block height" front sight, instead you can use your standard height sights. I know this was one issue I had with some other uppers I have picked up before and it sucks when you end up having to buy a special front sight to line everything up.

The trigger is nothing special, but it is smooth for a mil spec trigger. One thing that I found interesting is that they went with a flat trigger guard instead of a winter style. This isn't really that big of a deal I just found it different.

The first thing I did was toss on my Vortex Viper HS 2.5-10x44 when I got the rifle home, and it just gave the rifle the right look.

I am really looking forward to getting this rifle out to the range and seeing how well it performs and getting some video of it being run. Make sure to subscribe to the email listing so you can receive the latest updates on posts, and also subscribe to the YouTube channel.

Quick Thoughts on the Adams Arms Piston Conversion Kit and Installation

So a week ago I installed the Adams Arms piston conversion kit on my AR-15 and I wanted to write down some thoughts on the installation and my experience with it.

First off the directions are very good, there have been plenty of times where I have received a kit and the instructions left me even more confused.This wasn't the case with the Adams Arms conversion kit, the DVD that was included was very clear on what I needed to do to install the kit. 

One of the biggest things that I had trouble with was installing the bushing into the upper, even after cleaning it and putting a decent amount of lubricant/grease it still took a big hammer and some hard hits to get it installed. The good thing about that is I will never have to worry about the bushing backing out over time. 

One of the other things to really watch for is your gas block, you need to make sure that it is straight and in the middle, otherwise you will have trouble getting the piston out of the gas block. This will also cause issues with the system when firing it, and would more than likely cause malfunction and failure of the system.

The one thing that I really liked about the Adams Arms gas block was the fact that it uses hex head bolts to tighten it down on the barrel. With the sheer amount of force bouncing it around it needs a great mounting system and they provided it.

Two of the weirdest things to me when doing the conversion were the bushing and then the removal of the gas rings and installation of the spring on the bolt. While it's easy to understand why there is no need for the gas rings once a piston system is installed, it is just odd to pull the rings off and install a spring on the tail end of the bolt.

Instead of using the supplied hand guards I opted to use the Magpul MOE set, and it matches up perfectly with the piston system. I am sure at some point I will change over to a free float rail system but for now the MOE set will do the job.

Overall the installation was rather easy, and took no longer than 30 minutes to complete. I am looking forward to running the piston system as hard as I can and seeing just how well it will do. I will continue to post periodic updates so make sure to subscribe to the blog to receive them.