Lionheart Industries LH9C Expanded Initial Thoughts

So yesterday I posted a video with my initial thoughts on the Lionheart Industries LH9C and I figured that I would expand a little more with this post.

Fit and Finish

The LH9C is a very well made pistol, when you get one in your hands you can see how good the quality of the workmanship is. The slide moves easily on the frame with minimal play, and I can actually grip it with one hand and rack the slide back (not that I would ever really need to do that). There aren't any rough or sharp edges on the gun, and the Cerakote finish gives it an extremely clean look and very durable finish.

The serrations are deep and plentiful on the gun making it easy to rack the slide even when covered with dirt or your hands are slick. The serrations on the backstrap of the gun do offer a nice amount of grip to keep the gun from moving side to side, while remaining comfortable and not digging into your hand.

The grips are beastly, the diamond pattern is deep and gives a very positive hold to your hands. They aren't rubber like they would appear in pictures, but a more solid polymer/plastic which makes them a little less comfortable.

Ergonomics and Shooting

The ergonomics of the LH9C are pretty good, it does fit well in my hands and it is very easy to "point" without having to make adjustments. While the safety isn't really needed because of the DA+ feature it is easy to manipulate, even though it is opposite the 1911 safety direction which would take some getting used to.

One thing that I did notice was the trigger guard rubs my finger which would cause it to rub that finger raw during a class. This was actually an issue I ran into with my Glock 19 also, but I was able to fix that with an undercut whereas the LH9C cannot have that modification done to it.

Having the Novak sights is a very nice feature since they are stout and would stand up to a lot of abuse, but like I said in the video I am not a big fan of the fact that they ramp up and there isn't a way to use the rear sight to rack the slide if you need to.

Using the DA+ trigger is very different and takes some getting used to. One thing that I will say that I like about the DA+ is the fact that it's not a "de-cocker" like most other hammer fired guns, instead it makes getting into SA from DA easy. The problem I have is that it can throw you off target a bit when the hammer does drop back into SA mode. I am sure this is something you can train and adjust to if this gun would be a primary carry, but for me this is something I am just not a fan of.

The single action pull is actually one of the better ones I have felt on a stock hammer fired gun, and the reset is solid. It is very easy to get off quick successive rounds with this gun and remain on target. The double action pull is crazy heavy but I understand why, but is also the reason why if I carried this gun I would carry in the DA+ mode.

Thoughts So Far

The LH9C is an extremely well made gun, there is a lot of care put into the manufacturing of the gun itself and it does have some good upgrades on it when compared to some of the other hammer fired guns in it's price point. The fact that it comes with a soft carry case, Cerakote, novack sights, and 2 magazines is pretty cool because a lot of the other companies don't include things like that.

I am looking forward to getting a few hundred more rounds through the gun and seeing if it grows on me or not. I have been impressed by the fact that it was able to clear itself out enough to function despite being completely covered in the red Oklahoma dirt out at the range.

Like I said in the video, this isn't an ideal carry gun for me. However that is my opinion and preference and not a review of this gun.

Quick Thoughts on the Adams Arms Piston Conversion Kit and Installation

So a week ago I installed the Adams Arms piston conversion kit on my AR-15 and I wanted to write down some thoughts on the installation and my experience with it.

First off the directions are very good, there have been plenty of times where I have received a kit and the instructions left me even more confused.This wasn't the case with the Adams Arms conversion kit, the DVD that was included was very clear on what I needed to do to install the kit. 

One of the biggest things that I had trouble with was installing the bushing into the upper, even after cleaning it and putting a decent amount of lubricant/grease it still took a big hammer and some hard hits to get it installed. The good thing about that is I will never have to worry about the bushing backing out over time. 

One of the other things to really watch for is your gas block, you need to make sure that it is straight and in the middle, otherwise you will have trouble getting the piston out of the gas block. This will also cause issues with the system when firing it, and would more than likely cause malfunction and failure of the system.

The one thing that I really liked about the Adams Arms gas block was the fact that it uses hex head bolts to tighten it down on the barrel. With the sheer amount of force bouncing it around it needs a great mounting system and they provided it.

Two of the weirdest things to me when doing the conversion were the bushing and then the removal of the gas rings and installation of the spring on the bolt. While it's easy to understand why there is no need for the gas rings once a piston system is installed, it is just odd to pull the rings off and install a spring on the tail end of the bolt.

Instead of using the supplied hand guards I opted to use the Magpul MOE set, and it matches up perfectly with the piston system. I am sure at some point I will change over to a free float rail system but for now the MOE set will do the job.

Overall the installation was rather easy, and took no longer than 30 minutes to complete. I am looking forward to running the piston system as hard as I can and seeing just how well it will do. I will continue to post periodic updates so make sure to subscribe to the blog to receive them.

Breakthrough Clean Initial Thoughts

Yesterday I received a sample of Breakthrough Clean so I could do a review on it and share my thoughts on it with everyone. 

This morning I used Breakthrough Clean on the piston setup from my Adams Arms upper, which last week had over 150 rounds of Tula .223 run through it and you could see just how dirty the outside of the gas block was (the AA logo was completely covered). I also used FIREClean on the bolt from the same gun. Both parts showed a good amount of grime covering them because as we all know Tula is dirty and it likes to get everything covered. I didn't scrub with brushes or use picks to clean anything today, this was just a quick run of the cleaner to see how well it does.

As you can see in the above picture the Breakthrough Clean did an awesome job of doing what it is advertised to do. It stripped away all of the dirty ammo grime off of the piston setup with ease, and you can see just how dirty the paper towel is that was used to wipe the grime off.  It is great that there is no chemical smell to the product, and the fact that it is in a spray bottle is awesome also since it makes it easy to apply to either a paper towel or directly to the part being cleaned evenly. 

It took very little effort to clean the piston, all it took was a quick spray down and then I wrapped the paper towel around it and wiped it off. Easy.

The picture above shows the paper towel that was used to clean the bolt from the same gun using just a couple drops of FIREClean. It too was very easy to use to clean the grime off of the bolt, it did take a little more finesse only because of the lugs on the bolt and cleaning between them. 

(The piston looked dried out after cleaning and the Bolt was slick)

Here is the point that I wanted to get to since I know there are some people reading this and shaking their heads saying "These are 2 completely different products! One is a degreaser and the other is a lube!" I hear you and I know what you are saying, however here is the reason why I did this. There are lots of items out there that can do multiple things and do them well, while other things focus on one aspect and excel at it; FIREClean both cleans and lubricates while Breakthrough Clean strips and cleans.

Yes Breakthrough Clean is a degreaser, and it does that job top notch; but as you can see in the picture above it does not lubricate the part that it is cleaning. This means that after you finish cleaning your gun and gun parts you will have to go back through and use a lubricant before putting your gun back together. Don't get me wrong Breakthrough Clean has it's place in my workbench now because it does such a great job of degreasing and cleaning dirty parts. However with my time being limited because I would rather spend time with my wife and kids, I don't always want to take the time to run a 2 step process for cleaning and lubricating my guns.

If you are looking for a degreaser that will strip away all of the dirt and grime I would highly suggest checking out Breakthrough Clean. As I said a few times above, it does an excellent job cleaning off gun parts that are dirty, and also does a great job of stripping off old lubricants that have been applied to your gun before.

I will be posting more on Breakthrough Clean in the future once I have some more time with it but like I said, it has it's place in my workbench because I have seen how well it works.

The Evolution of my EDC

When I first started carrying concealed my EDC left a lot to be desired, it literally consisted of a gun and a holster. Sure I carried a pocket knife but it wasn't the best for EDC. I had never really taken the time to plan out what should be carried in my EDC, I just tossed a gun and knife on and thought I was good to go. 

However as time has gone by I have put more thought into what I should have on me at any given time. What I am allowed to carry at work is completely different than what I carry outside of work, and this is something everyone should take into consideration. 

On a typical day at work or outside of work there are 2 main things that you can find on my person. The first is a knife, something that is both useful for self defense as well as utility work. Which this recently has become the Boker Coye Ridgeback or the QTRMSTR B.A. Baracas, both are sturdy blades which are easy to quickly deploy. I have spent a decent amount of time with both of these knives figuring out which ways I can deploy them best and where on my body they conceal best while remaining easily accessible. 

The second item you will find is the Olight M10 Maverick flashlight that I recently purchased. For awhile I was carrying a flashlight that was given to me by my dad, and while it was a decent flashlight the size of it made it hard to carry in a pocket. The Olight M10 is small, lightweight, and has a pocket clip that keeps it readily accessible. 

At first I didn't carry a flashlight because my phone has one, however as I have read and studied more on self defense I realized that my phone would really only be useful to make an emergency call. Having a pocket flashlight that has a very bright light comes in handy in many different situations, from finding something I dropped outside, to clearing my house. It is important to have a light that you can trust and I have found the Olight to fit the bill for me.

Outside of work I carry my gun, lately I have switched between the Glock 19 and Glock 42 (which is in a very long review run). The 19 is being carried appendix in an Alpha Concealment Appendix IWB holster which is minimalistic and very comfortable. The 42 currently does not have a Kydex holster, instead it is being run in a DeSantis SofTuk holster while it waits on the PHLster holster that I recently ordered for it. 

When I first began carrying I didn't carry an extra magazine for the 19 because I figured since it holds 15 rounds that would be enough. However that mindset also changed as I studied more on self defense and also took the CFS class, what I have learned taught me that I should carry one or two spare magazines with me for the worst case scenario. Once spare magazines are available for the Glock 42 I will be picking up a few more to carry with me.

Some of the other items that have found their way into my EDC are the Bastion LLC battery back up, iPhone charging cable, and a small kit of bandages plus a few other small medical items. 

One of the biggest reasons I have decided to add the battery back up to my EDC is because my phone tends to drain it's battery about as fast as it charges sometimes. I would have loved it if I had the backup during SHOT Show when I was using my phone to take pictures, post updates, and text/call the people I was trying to meet up with and around noon my fully charged battery was down to 30%. I could only imagine how much it would suck if I was somewhere without phone access and my phone died, leaving me unable to use it in an emergency.

While this is not a comprehensive list of items that should be in an EDC kit, it is a list of the items that I have found to work best for me, and as I explained I have added items as time goes on. The most important thing is to know which items you will personally need, and have trained with. Also never forget that an EDC kit does not replace important things like situational awareness and common sense. While the goal is to be prepared for something bad, it is best to remain aware and keep yourself out of bad situations.

One more very important thing that I have learned, and I know it is something that is stressed over and over. Train with what you carry, wether you are training with your knife, stun gun, pepper spray, or firearm. Your skill is perishable, muscle memory will fade, and familiarity with an item will too. 

I am sure that my EDC will evolve more as time goes on, and I receive more training; but at this point I am comfortable in knowing that the items that I currently carry are items that I could use in a bad situation to give me an advantage and a chance to live.

Glock 42 First Range Trip Thoughts

Today I took the Glock 42 out to the range for a quick session, although I wasn't able to get video due to the wind being strong enough to blow the tripod over I was able to get some decent trigger time. 

One of the biggest things I have been hearing from people is how Glock screwed up by making it a .380 and also making it the size it is (too big) for a .380, while I personally would have prefered it in a 9mm single stack the .380 is still a decent round.

Let me start off with this, for those who complain that it is too large for a .380 handgun there is a point of diminishing returns when it comes to the size of a handgun. When you get so small like the Ruger LCP or the Kahr .380, you get to a point that the gun is no longer comfortable to shoot, and when a gun becomes uncomfortable to shoot you don't train with it. 

In my opinion the Glock 42 is the exact size that it needs to be, it disappears when I carry it appendix IWB and I myself hardly realize it's there. Sure it is a little big to be a pocket pistol, but I have to wonder if it would be practical to draw from your pocket anyways. 

I think the fact that Glock made it the size they did is great, as I said before it is very comfortable to both carry and shoot. I am confident I would have no issue taking a class with it (as long as I could find enough mags). 

This range trip I ran 107 rounds of ammo through it, 7 were PDX1 Self Defense rounds, 50 were PPU 95gr FMJ, and 50 were Remington 95gr FMJ. There were no issues with feeding or firing, the only issue I ran into was the slide not locking back on empty. While it wouldn't lock back on empty with both hands it would lock back with one hand, so I'm thinking it's an issue with hand placement and I will need to work on that.

The 42 was an absolute pleasure to shoot and I was fairly accurate with it also. With the gun being the size it is, it will take me another trip to get it zeroed in. I am looking forward to running quite a few hundred rounds through this gun, and hopefully this next trip out I can actually get some video. 

Make sure to subscribe to the email list to receive the latest updates from the blog, there will be plenty going up over the next few weeks.

Pre Range Thoughts: Glock 42

As many of you know I was like many others when Glock announced they would be releasing a new sub compact handgun, there had been hopes that they would release it in 9mm at first and then over time add .40 and .45 to the mix. Instead Glock released the 42 in .380ACP, and at first everyone was against the idea that it should be released in this caliber. I didn't totally agree with the fact that it was going to be a .380ACP, partly because it is a harder round to find as of late and when I had seen it in stock it was priced higher than the 9mm.

When we headed to the Media Day at the Range during SHOT Show I was still very skeptical of the 42. I knew that it being a Glock it would function like a Glock and there should be no issue there, but there was just that question of why make it in .380? Once at the Glock booth I took a few moments to take a good look at the 41 and 42, they both looked good but I was still on the fence. I watched a few other people head up to the table to shoot them, and each time the person shooting would look a bit surprised with a few of them looking unimpressed. It seemed like for the most part everyone enjoyed both of the new Glocks.

When it was finally our turn to head up and shoot them I was looking forward to handling both of the guns. The first one I picked up to fire was the 42, and my first impression was "this thing is tiny" but it was also surprisingly comfortable in my hand for a .380ACP. There have been a few other pocket pistols that I have owned and every single one of them that was a .380 ended up being sold about 2 range trips in due to various reasons (crappy trigger, uncomfortable, too small, etc..) but the Glock 42 was different. Shooting with the 42 was completely different than what I was used to with any of the other sub compact .380ACP's but it was only for 5 rounds since that was all they gave us, and while I was very happy with the way it shot...it was only 5 rounds.....but they were enough to convince me that I wanted to pick one up for more range time with it.

So I went ahead and asked my FFL to set one aside for me so I could pick it up and run as much ammo through it as I possibly can and see just how much I really do like this new baby Glock. When I picked it up this past weekend I had forgotten just how small it is, but even though it is small it is still very easy to hold. The biggest surprise (which isn't really a surprise) was the fact that when I tossed it into the Tuff Products adjustable holster and carried it, it disappeared in concealment. It was almost impossible to tell that I was carrying it, and it was very comfortable to wear the rest of the day.

When I got it home I set it next to my 19 that I carry all the time (except at work) and did some size comparison so I could put the pictures up here. It is surprising how small the gun, while at the same time being comfortable to hold (and in my limited experience, shoot). I am looking forward to running hundreds of rounds through the gun and seeing just how Glock it actually is.

Make sure to join the emailing list so you can receive updates on the Glock 42, also follow me on Instagram for more pictures @Spartan_TC